Izdelki za varnost in (25)

Microwave bistatic sensors FORTEZA-FONAR are mounted into park lamps and combine protection and lighting functions. The sensors are intended for the protection of administrative buildings, park territories, office buildings, villas and other objects with high requirements for the territory appearance or secrecy of the alarm system. The sensors function as the alarm devices and decorative lamp. The lights can be switched on or off automatically or manually. The housing of one sensor can contain one or two receivers (or transmitters). Like this we decrease the number of devices on the territory and mounting works. Several frequency letters of the sensors allow for the sensors to operate near each other. It is possible to produce upon request the sensors FORTEZA-FONAR with a radio channel for wireless transmission of an alarm signal to a centralized monitoring console. Operational frequency:9,375 GHz Range:10…75 m Detection width:0,5...2 m Detection height:up to 1,7 m Supply Voltage:220 V Current consumption:0,15 A Detection probability:0.98 Operational temperature:minus 40...+65 °C Protection Level:IP-43 Alarm output:Relay contacts Dimensions:1450хØ160 mm Weight:5 kg

The microwave linear sensors FMW-50 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:5…50 m Detection width:0,75...2 m Detection height:up to 1,4 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:141x123x71 mm Weight:0,4 kg

FORTEZA-200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…200 m Detection width:up to 1,0 m Detection height:up to 1,6 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:211x138x112 mm Weight:2,4 kg

FORTEZA-M500 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M500 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…500 m Detection width:up to 3,5 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0,045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:395x182x100 mm Weight:2,9 kg

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-65 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:5…50 m Detection width:up to 0,7 m Detection height:up to 1,3 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:141x123x71 mm Weight:1 kg

FORTEZA-M200 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M200 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…200 m Detection width:up to 2,1 m Detection height:up to 1,6 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:195,5x154,5x100 mm Weight:1,4 kg

FORTEZA-300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…300 m Detection width:up to 1,6 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+70 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:829x237x205,5 mm Weight:10 kg

FORTEZA-M50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power station, private houses, etc.) Operation on 24,15 GHz allows to: - use sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:5…50 m Detection width:up to 1,0 m Detection height:up to 1,3 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:195,5x154,5x100 mm Weight:1,4 kg

FORTEZA-50 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-50 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 4 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…500 m Detection width:up to 2,5 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0.045 A Detection probability:0.98 Operational temperature:minus 50...+70 °C Protection Level:IP-55 Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:829x237x205,5 mm Weight:10 kg

FORTEZA-M300 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M300 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other. Operational frequency:24.15 GHz Range:10…300 m Detection width:up to 2,7 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0,045 A Detection probability:0.98 Operational temperature:minus 50...+80 °C Alarm output:Relay contacts Interfaces:RS-485, USB, Bluetooth or Ethernet (upon request) Dimensions:395x182x100 mm Weight:2,9 kg

The microwave linear sensors FMW-200 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:10…200 m Detection width:0,75...4 m Detection height:up to 1,7 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:213x213x70 mm Weight:2,4 kg

The microwave linear sensors FMW-100 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:10…100 m Detection width:0,75...3 m Detection height:up to 1,6 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:211x134x78 mm Weight:1 kg

FORTEZA-M100 is a volumetric bi-static microwave sensor that generates an invisible detection zone between a transmitter and receiver. When an intruder crosses the detection zone, an alarm is generated. FORTEZA-M100 provides perimeter security of any object that needs protection against unauthorized intrusion from outside (industrial plants, airports, power stations, private houses, etc.) Operation on 24,15 GHz allows to: - use the sensor in many countries all over the world without getting approval for frequency use; - minimize the influence of different types of interference; - provide narrow detection zone and make it possible to use the sensors on different sites. Configuration of sensors using special software (under Windows) via USB allows to set the optimal operation mode, also remotely from the guard room via RS-485 interface. 8 frequency letters eliminate the influence of adjacent sensors. Like this it is possible to put several sensors near each other.

The vibration sensors VIBRO-M are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-M are intended for detection of destruction of physical fences. The vibration sensor VIBRO-M used for the protection of window, door or gate grids. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-65 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

FORTEZA-1000 is a quickly deployable intrusion detection system intended for temporary protection of sites, small perimeters and perimeter sectors. The system can be used for protection of VIP aircrafts, critical cargo, precious machines, night parkings, military and medical camps, building facilities as well as for Border Service to detect the movement of criminal groups. Operational frequency 2,45 GHz NO DEAD ZONES NO MUTUAL INTERFERENCE OF ADJACENT SETS

The vibration sensors VIBRO-MG are intended to detect deliberate destruction of metal grids or metal shields. The alarm is generated in the case of sawing, drilling or multiple beats. Vibration sensors VIBRO-MG are intended for detection of destruction of physical fences. The vibration sensor VIBRO-MG used for the protection of sewers, storm drains and other fences temporary flooded. If the surface of detection allows, it is possible in some cases to use the sensor to protect two grids welded by the metal rod, Like this we decrease expenses. Vandal-proof housing makes it impossible to dismount the sensor without opening the cover. Under the cover there is the tamper. Easy design and reliable sensors are well protected from climatic effects. VIBRO-MG keeps its specifications under water jets or during temporary flood. Protected surface:10 m2 Supply Voltage:6…30 V Current consumption:0,002 A Detection probability:0.98 Operational temperature:minus 45...+65 °C Protection Level:IP-67 Alarm output:Relay contacts Dimensions:90x58x65 mm Weight:0,25 kg

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. THE MICRO WIRE HAS A SMALL DIAMETER AND A MASKING COLOR. That’s why it is barely visible for an intruder and doesn’t provoke any efforts for a human during its breakage. The sensor MOSKIT is supplied from a built-in battery. SMALL DIMENSIONS AND WEIGHT. Micro wire reserve:not less than 1000 m Supply Voltage:ALKALINE battery, dimension A23 (N), 12V Current consumption in stand-by mode:0,045 A Time of continuous operation:1...1,5 months Operational temperature:minus 40...+65 °C Alarm output:alarm sound Dimensions:Ø55x90 mm Weight:0,25 kg

Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire. A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line. After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm. MOSKIT-KIT is intended for the sensor transportation on a waist belt in the compact bag and has two spare cartridges. MOSKIT-KIT includes: - compact bag with the fixations on a waist belt - 1 pc. - sensor MOSKIT - 1 pc. - spare cartridges in the protective pocket - 2 pc. Micro wire reserve:not less than 1000 m Supply Voltage:ALKALINE battery, dimension A23 (N), 12V Current consumption in stand-by mode:0,045 A Time of continuous operation:1...1,5 months Operational temperature:minus 40...+65 °C Alarm output:alarm sound Dimensions:Ø55x90 mm Weight:0,25 kg

The microwave linear sensors FMW-300 are intended for the protection of different sites and for detecting an intruder crossing the detection zone. The sensors are intended for the protection of direct perimeter sectors. The sites include industrial facilities, airports, sites of force structure, power plants, private premises, etc. Available and effective sensor for the protection of different sites with maximum number of positive testimonials. Operation on 10,525 GHz allows to increase the width of the detection zone. Like this we make it difficult for the intruder to cross it. The easiest configuration using control units on-board of the Rx does not require high qualification of staff. Multimeter and screw driver are enough for configuration. The sensor is successfully used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:10…300 m Detection width:0,75...5 m Detection height:up to 1,8 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:213x213x70 mm Weight:2,4 kg

FORTEZA-PERIMETER SOFTWARE is intended to control and manage TM Forteza sensors having RS-485 and other devices with NC connected via FORTEZA-ADAPTER (ТМ FORTEZA). FORTEZA-PERIMETER has an intuitive interface and doesn`t require special knowledges to work with it. Features of FORTEZA-PERIMETER Graphic representation of devices on the map. Automatic search for connected devices. Control of connected sensors and the colour indication of their status: alarm, norm and failure. Display of alarms number in the operation window for each device. Alarm reset for each sensor. Enable/Disable alarm sound. Indication of the subzone where an alarm occurred (for FM and MIR-M series). Connection of additional sound and light alarms via FORTEZA-CONTROLLER. Recording and storing of an event log, searching for events by a given filter and printing the protocol. LED security lightning brightness control. Possibility to change the logical number of devices. Maximum length of line:1200 m Number of lines:4 Number of devices in a line:32 Maximum devices:128 Rate of exchange:1200 ÷ 19200 bit/sec

The searchlights LED-75/60 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector. Color of lighting:white (5000 - 6500 K) Light flux:5250 Lm Angle of lighting:60⁰ Supply Voltage:200...240 V Watt consumption:50 W Operational temperature:minus 40...+50 °C Protection Level:IP-55 Alarm input:Relay contacts Interfaces:RS-485 Dimensions:285,5x184x76 mm Weight:2 kg

The searchlights LED-40/10 are intended for the security lighting of perimeter sites and grounds of different objects. The searchlights are intended for the security lighting of perimeter sites and grounds of different objects. Like all up-to-date LED light sources it assures significant energy saving and high reliability. No stroboscopic effect and collinear optics exclude flare lighting of CCTV cameras and allow to use searchlights for lighting the zones monitored by cameras. It is possible to use different operation modes, for example, full lighting mode, standby mode, switched off. Continuous light flux in all the range of power supply is resistant to low input voltage drops and have no on delay while supplying voltage. High reliability, LEDs lifetime up to 50 000 hours. Remote control via RS-485 interface allows to fade the power of light flux directly from the guard room creating its own level of lighting on the protected sector. Color of lighting:white (5000 - 6500 K) Light flux:3750 Lm Angle of lighting:10⁰ Supply Voltage:200...240 V Watt consumption:40 W Operational temperature:minus 40...+50 °C Protection Level:IP-55 Alarm input:Relay contacts Interfaces:RS-485 Dimensions:306,5x195x66,5 mm Weight:3,2 kg

Les détecteurs sont destinés à la sécurisation des secteurs séparés du périmètre où il est impossible ou difficile d’installer les barrières bistatiques: impasses, marais, ravins, dépôts, tunnels, viaducs, etc. La division de la zone de détection en 12 sous-zones permet de configurer la sensibilité séparément dans chaque zone. Une ou plusieurs sous-zones peuvent être déconnectées. Déconnectant les sous-zones nous pouvons assurer les passages sanctionnés sur le site protégé pour faire passer les gens et les voitures à travers les portes. Afin d’augmenter l’immunité contre le bruit, il est recommandé de déconnnecter les sous-zones où la détection n’est pas obligatoire. La configuration des détecteurs est faite: -PC portable (Windows) par le port USB près du détecteur installé -tablette ou smartphone (Android) par Bluetooth sans fil ou USB -PC connecté par Ethernet -BUS RS485 à distance du poste de garde. Les détecteurs FM-30(24)-V ont 5 canaux de fréquence. Fréquence:24,15 GHz portee:2,5...30 m Largeur de la zone de détection:12 m Hauteur de la zone de détection (en espace libre):8 m Alimentation:10...30 V Consommation:0,06 A/ 24 V Probabilité de détection:0,98 Température d’utilisation:de -40°C à +80°C Indice de protection:IP-55 Sortie d'alarme:Contacts de relais Interfaces:RS-485, USB, Bluetooth ou Ethernet (sur commande) Taille de la barrière:141x123x71 mm Poids:1 kg

FMW-200 est une barrière hyperfréquence bistatique linéaire destinée à sécuriser des sites sensibles différents et à détecter un intrus franchissant la zone de détection. FMW-200 assure la sécurisation des sites sensibles: usines industrielles, aéroports, sites de haute sécurité, centrales électriques, villas, etc. Solution fiable et disponible pour la protection des sites différents ayant beaucoup de rapports du test positifs parmi nos clients. Le fonctionnement sur la fréquence 10,525 GHz permet d’élargir la zone de détection. Il devient plus difficile pour un intrus de franchir cette zone surveillée. La configuration simplifiée est prévue par les organes de commande situés sur le Rx et n’a pas besoin de haute qualification du personnel et d’équipement spécial. Un tourne-vis et un multimètre suffisent pour l’ajustage. La protection des sites extérieurs du périmètre libres de bâtiments et de haute végétation et la détection de haut niveau de la zone surveillée. Fréquence:10,525 GHz portee:10…200 m Largeur de la zone de détection:0,75...4 m Hauteur de la zone de détection:Jusqu’à 1,7 m Alimentation:9…30 V Consommation:0,035 A Probabilité de détection:0,98 Température d’utilisation:de -40°C à +80°C Indice de protection:IP-55 Sortie d'alarme:Contacts de relais Taille de la barrière:213x213x70 mm Poids:2,4 kg